Storage - Echo GT-1100 Operator's Manual

STORAGE
LONG TERM STORAGE
1. Clean each part and replace or repair damaged or
worn parts.
2. Apply a thin coating of oil to all metal parts to
prevent rust.
3. Drain fuel from fuel tank. Start engine and let run to
remove fuel from carburetor and fuel lines.
4. Remove cutter head, apply a generous coating of oil
and store in plastic.
5. Pour a small amount of clean motor oil into spark
plug hole and pull starter handle until motor reaches
top dead center.
6. Store in a dry area, free from dust.
PARTS BOOKS
To obtain a replacement Parts Book, complete this order
form and enclose a check or money order for $2.00.
Make payable to ECHO, INCORPORATED and mail to:
ECHO, INCORPORATED
P.O.Box 67
Lake Zurich, IL 60047
ATTN: Technical Publications
Purchaser's Name
□□□□□□□□□□□□□□□□□□□□
Address (Street)
□□□□□□□□□□□□□□□□□□□□
(City) (State) (Zip Code)
□□□□□□□□□□□□□□□□□□□□
ECHO Model No. G.T.-1100
Parts Book No. 898 696-44330
ECHO Model No. G.T.-2101
Parts Book No. 898-696-44430
20