LG DLEV833W Owner's Manual page 8

nstallat
The fo[[ow+ng instructions are applicable to
instaltations of the dryer in a manufactured or mobile
home+ tf you are uncertain whether your propo_d
insia[[ation will comp]y wkh these standards, please
contact a _rvice and installation professional for
assistance.
The following instructions apply to any installation
of the dryer in a manufactured or mobile home:
1) Electric dryers may be vent_ to the outside
using the back, left, or right+
2) The dryer exhaust duct must be affixal securely
to the manufactured or mobile home structure,
and the exhaust duct must be made of a material
that will resist fire and combustion, and it is
recommend_J that you u_ a rigid or flexible
metal pi_,
metal screwsor fasteners that extend
3)
4)
5)
6)
7)
8)
Make sure the dryer has adequate access to
outside fresh air to ensure profit of_ration. The
o_ning for outside fresh air must _ at [east 25 in _
(163c_)
It is imf_rtant that the clearance of the dud from
any combustible construction _ at [east 2 inches
(5 cm), and, when venthlg the dryer to the
outdoors, the dryer can _ insta[[_ with a
clearances of 1 inch (2.5 crn) at the sides and back
of the dryer.
DO NOT connect the exhaust duct with any other
duct, vent, chimney, or other exhaust duct.
Make sure the dryer has adequate access to ouBide
fresh air to ensure pro_r operation. The o_rling
for outside fresh air must be at [east 25 in_(163cr_).
It is important that the clearance of die duct from
any combustible construction be at least 2 inches
(5 cm), and, when venting the dryer to the
outdoors, the dryer can be installed with a
clearance of 1 inch at the sides _d back of the
dryer.
Please _ aware that venting materials am not
supplied with the dryer. You should obtain the
venting materials n_:essary for prof_,r insta[iation.
DO NOT vent the exhaust duct under the
manufactured or mobile home.