LG DLEV833W Owner's Manual page 14

lectrical Requirement For E
If your local codes or ordinances permit the
connection of a tYame-grounding conductor to the
neutral wire, use these instructions. If your local
codes or ordinalces do not allow tile connection of
a frame+grounding conductor to the neutral wire,
use tl_e insm_ctions under
_ction 3: Optional 3+wire connection.
• If your kraal codes or ordinances do not allow the
connection of a frame+grounding conductor to the
neutral wire, use the instructions under this
section.
,3-wire recepNcle
NEMAtype 10-30R)
I Neutral prong
Neutral
Center termir_
b_k screw (silver)
Neutralgrou_i_
wire (white)
Neutral grounding
wl;m(whffe)
1.
+
.
C{ nnect neutral wire (white) of _wer cord to
center terminal block screw.
Cormect ground w_e of appliance and neutral
wire of _}wer cord to center terminal block
screw.
Com]ect red and black wke to the left and fight
terminal block screws.
4. Make sure that the strain relief screw is tightened.
and be sure that all terminal block nuts are on
tight mid power cord is in right position.
5+ Colmect a independent ground wire from exmrnal
ground conrlector
to
proper ground.
This is probably a good way to cream a ground
loop and electrcute someone.