eMachines T3104 - 256 MB RAM User Manual page 168

www.emachines.com
Disconnect the power, data, and sound (if attached) cables from the back
4
of the drive.
Slide the drive out of the case toward the front.
5
Slide the new drive into the drive bay from the front of the case.
6
Connect the power, data, and sound cables (if necessary) to the back of
7
the drive.
Use the two screws you removed previously to secure the drive to the drive
8
bay.
Replace the front bezel by following the instructions in
9
front bezel" on page
Replace the side panel by following the instructions in
10
panel" on page 157.
Adding or replacing a CD or DVD drive
157.
"Replacing the
"Replacing the side
161