How To Display The Status Of The Track Changes Feature; How To View The Switch Status Policy Threshold Values - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

A message displays, verifying that the track changes feature is on:
switch:admin> trackchangesset 1
Committing configuration...done.
switch:admin>
The output from the track changes feature is dumped to the system message log for the switch.
3. Use the errDump or errShow command to view the log.
Items in the system message log created from the track changes feature are labeled TRCK:
2004/08/24-08:45:43, [TRCK-1001], 212,, INFO, ras007, Successful login by user
admin.

How to display the status of the track changes feature

1. Connect to the switch and log in as admin.
2. Enter the trackChangesShow command.
The status of the track changes feature is displayed as either on or off. The display includes whether the
track changes feature is configured to send SNMP traps:
switch:admin> trackchangesshow
Track changes status: ON
Track changes generate SNMP-TRAP: NO
switch:admin>

How to view the switch status policy threshold values

1. Connect to the switch and log in as admin.
2. Enter the switchStatusPolicyShow command at the command line.
Whenever there is a switch change, an error message is logged and an SNMP connUnitStatusChange
trap is sent.
HP StorageWorks 4/16 SAN Switch and 4/8 SAN Switch, SAN Switch 2/8V, SAN
Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, 4/64 SAN Switch, 4/32B SAN
Switch and 400 MP Router:
The output is similar to the following:
switch:admin> switchstatuspolicyshow
The current overall switch status policy parameters:
----------------------------------
PowerSupplies
Temperatures
MarginalPorts
FaultyPorts
MissingSFPs
switch:admin>
HP StorageWorks SAN Director 2/128 and 4/256 SAN Director:
52 Performing basic configuration tasks
Down Marginal
2 1
2 1
Fans 2 1
Flash 0 1
5 2
2 1
2 1