Installing The Switch - HP 438031-B21 - 1:10Gb Ethernet BL-c Switch User Manual

Installing the switch

CAUTION:
IMPORTANT:
NOTE:
I/O bays. Port 17 is disabled by default. The port must be manually enabled to use.
A successful installation is indicated by a green Health LED. If the Health LED is amber or power is not
applied to the switch, see the "Troubleshooting" section of the HP BladeSystem enclosure setup and
installation guide for more information.
Do not cable the switch until after configuration.
Make sure that the server NIC configuration matches the switch bay selected.
When installing two switches, there is one switch interconnect port between adjacent
Installing the switch 21