HP 438031-B21 - 1:10Gb Ethernet BL-c Switch User Manual page 42

Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message
4.
appears:
NOTE: To perform serial downloads at 57600 baud rate, press the Shift-F keys. To perform
serial downloads at 115200 baud rate, press the Shift-D keys.
After the message in Step 4 appears, reconfigure the terminal emulation console using these
5.
parameters.
Parameter Value
Baud rate 115200
Data bits 8
Parity None
Stop bits 1
Flow control None
Press the Enter key several times on the PC that is connected to the console port of the switch. When
6.
the console port is successfully communicating with the PC, indicating readiness for image transfer,
continuous C's appear:
Be sure that the new switch boot code firmware file is available on the computer. This file can be
7.
downloaded from the CD that is shipped with the switch or from the HP website
(http://www.hp.com/go/bladesystem/documentation).
Performing a serial download 42