Dell PowerConnect Zeiss 7048 Getting Started Manual page 89

To setup the SNMP management account you must specify
the management system IP address and the "community
string" or password that the particular management
system uses to access the switch. The wizard
automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell
Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
注：:
SNMP
權 僅 動 SNMPv2 禁 返 而
SNMPv3 SNMPv3
全 （ 引擎 ID 看等 .
( 1
SNMP SNMP
Dell Network Manager
. SNMP 2
. SNMP SNMP 1 3
.
SNMP [Y/N] y
SNMP IP
[ 15] Dell Network Manager
87