Dell PowerConnect Zeiss 7048 Getting Started Manual page 229

To setup the SNMP management account you must specify
the management system IP address and the "community
string" or password that the particular management
system uses to access the switch. The wizard
automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell
Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user documentation.
SNMP
15]
To add a management station:
Please enter the SNMP community string to be used.
[public]: public
メモ：
SNMPv2
ID
SNMPv3
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station [0.0.0.0]: 10.1.2.100
[0.0.0.0]
A.B.C.D
[public]
IP
Dell Network Manager
SNMP
SNMPv3
0.0.0.0
[
SNMP
IP
227