Dell PowerConnect Zeiss 7048 Getting Started Manual page 228

You must respond to the next question to run the setup
wizard within 60 seconds, otherwise the system will
continue with normal operation using the default
system configuration. Note: You can exit the setup
wizard any time by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
1
The system is not setup for SNMP management by
default. To manage the switch using SNMP (required for
Dell Network Manager) you can
SNMP
Dell Network Manager
. Set up the initial SNMP version 2 account now.
SNMP
. Return later and setup other SNMP accounts. (For
more information on setting up an SNMP version 1 or
3 account, see the user documentation).
SNMP
Would you like to setup the SNMP management interface
now?[Y/N] SNMP
[Y/N] y
226
[Y/N] y
2
60
Ctrl +Z
? 60
SNMP
SNMP
CLI
1 3
?