Dell PowerConnect 6224 Command Line Interface Manual page 1341

Syntax
ip-address | hostname
telnet {
ip-address — Valid IP address of the destination host.
•
hostname — Hostname of the destination host. (Range: 1–158 characters)
•
port — A decimal TCP port number, or one of the keywords from the port
•
table in the usage guidelines (see "Port Table" on page 1342).
keyword — One or more keywords from the keywords table in the user
•
guidelines (see "Keywords Table" on page 1341).
Default Configuration
port —
Telnet port (decimal 23) on the host.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#telnet 1.1.1.1?
Keywords Table
Options
debug
line
localecho
<cr>
<port>
port
} [
Description
Enable telnet debugging mode.
Enable telnet linemode.
Enable telnet localecho.
Press ENTER to execute the command.
Enter the port number.
keyword1......
] [ ]
System Management Commands
1341