Traceroute - Dell PowerConnect 6224 Command Line Interface Manual

Keyword
tacacs
talk
telnet
time
uucp
whois
www
Example
Following is an example of using the telnet command to connect to
176.213.10.50.
console#telnet 176.213.10.50
Esc U sends telnet EL

traceroute

Use the traceroute command in Privileged EXEC mode to discover the IP
routes that packets actually take when traveling to their destinations.
You can use traceroute command in either of two formats:
• You can specify the IP address and hostname in the command. The
traceroute {ipaddress|hostname} command sets the parameters to their
default values.
• You can enter traceroute to without specifying the IP address and
hostname, and specify values for the traceroute parameters.
Syntax
traceroute [ ip | ipv6 ]
maxTtl
] [ maxFail
size
[ size ]
ipaddress — Valid IP address of the destination host.
•
hostname — Hostname of the destination host (Range: 1–158 characters).
•
Description
TAC Access Control System
Talk
Telnet
Time
Unix-to-Unix Copy Program
Nickname
World Wide Web
ipaddress hostname
|
maxFail
] [ interval
[ initTtl
interval
] [ count
System Management Commands
Port Number
49
517
23
37
540
43
80
initTtl
] [ maxTtl
count port
] [ port ]
1343