Epson TM U200D - B/W Dot-matrix Printer Technical Manual page 37

.
DIP switch 2
DIP Switch Function
Print column selection
1
7 9 font/9
2 Internal use (*1)
3 Undefined
4 I/FnInit reset signall
NOTES:
Do not change the setting of DIP switch 2-2 (fixed to OFF).
Changes in DIP switch settings (excluding switch 2-4, which is I/F reset signal) are recognized only when the
printer power is turned on or reset using the interface. If the DIP switch settings are changed after the printer
power is turned on, the change does not take effect until the printer is turned on again or reset (excluding switch
2-4).
Rev. B
ON
42CPL/35CPL
9 font
Enabled
TM-U200D/U200PD Technical Manual
OFF
40CPL/33CPL
Disabled
Features and General Specifications 1-25