Main Assembly 10; Detector Sub-Ass'y - Epson TM U200D - B/W Dot-matrix Printer Technical Manual

3. Move the Spring, belt tension from the hook of Frame, paper feed to the hook of Frame, base.

Main Assembly 10

Detector sub-ass'y

1. Insert the Detector portion of the Detector ass'y into the Frame, base ass'y; then attach the board by
pushing it in.
2. Press the board down to attach it completely.
3. Attach the Paper detector switch to the Frame, base ass'y.
Make sure that the Detector board is not damaged.
4. Hook the lead wires of Detector ass'y to the Frame, base ass'y as shown in the illustration.
5-16 Disassembly, Assembly, and Adjustment
Spring, belt tension
Paper detector switch
Frame, base ass'y
Hook of Frame, base
Detector sub-ass'y
Rev. B