Near-End Detector Ass'y(N.e-U200); (Optional) - Epson TM U200D - B/W Dot-matrix Printer Technical Manual

Near-end detector ass'y(N.E-U200); (optional)

1. Attach the Lever, N.E detection to the Holder, N.E detection.
2. Connect the N.E cable connector to the Microswitch and attach it to the Holder, N.E detection with
the screw.
N.E cable
3. Decide whether you want to install the Spacers, N.E detections.
The amount (A) of paper remaining including the paper roll core is changed by the Spacers, N.E
detections.
The amount (A) with the Spacers, N.E detections: 3 to 4 mm (0.12 to 0.16")
The amount (A) with the Spacers, N.E detections: 6 mm (0.24")
5-44 Disassembly, Assembly, and Adjustment
Lever, N.E detection
d
CBB-tite (M2x8)
[0.1 to 0.2 N • m
(1 to 2 kgf • cm)]
Microswitch
Holder, N.E detection
A
Rev. B