Epson TM U200D - B/W Dot-matrix Printer Technical Manual page 100

4. Attach the Gear, paper feed reduction to its shaft as shown in the second illustration below. Make
sure that the Gear, reduction is closer to the frame than the Gear, paper feed.
5. Next, insert the J feed roller shaft holder L into the frame as shown in the illustration.
6. Fix the J feed roller shaft holder L onto the shaft on the Roller, paper feed ass'y, insert it in the frame,
and lock it with R.E.
R.E(2.3)
J feed roller
shaft holder L
Note:
The right J feed roller shaft holder L, which is fixed to the Roller, paper feed ass'y, is inserted
into the frame first; then the J feed roller shaft holder L is attached.
5-4 Disassembly, Assembly, and Adjustment
J feed roller shaft holder (right)
Gear, paper feed
Gear, paper feed
reduction
Rev. B