Compaq ML350 - ProLiant - G2 Maintenance And Service Manual page 63

Connectors, Switches and LEDs
Table 4-4: System Configuration Switch Settings
Switch Default Position
1 Off
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
Note: Switch positions 7 and 8 are reserved for Compaq authorized service providers only. Do not change the
specified default setting for these positions, unless instructed otherwise.
4-6
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:07 PM
Function Description
Video disable Used when ROM
does not detect an
installed video board
Lock configuration Enables or disables
the ability to write to
NVRAM to
reconfigure the
system
Tower or rack Used to specify a
configuration tower or rack
configuration
Enable diskette Enables or disables
boot booting from the
diskette drive
Password disable Used to disable
password
Clear CMOS and Used to clear system
NVRAM configuration settings
Reserved N/A
Reserved N/A
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide
Settings
Off = ROM autodetects an optional
video board. If one is not detected,
then onboard video is enabled.
On = Onboard video is disabled.
Off = Configuration can be changed.
On = Configuration is locked and
cannot be changed.
Off = Tower configuration
On = Rack configuration
Off = Diskette drive boot is controlled
by the configuration.
On = Diskette boot is disabled.
Off = Password enabled
On = Password disabled
Off = Normal
On = When server is powered up, all
system configuration information is
erased.
N/A
N/A