Air Baffle - Compaq ML350 - ProLiant - G2 Maintenance And Service Manual

Air Baffle

To remove the air baffle:
1. Complete the preparation procedures. Refer to "Preparation Procedures" earlier in this
chapter.
2. Open the bezel door. Refer to "Bezel Door" earlier in this chapter.
3. Remove the access panel. Refer to "Access Panel" earlier in this chapter.
4. Loosen the thumbscrew that secures the air baffle to the server chassis (1).
5. Pull the air baffle out of the server (2).
Figure 2-9: Removing the air baffle
To replace the air baffle, reverse steps 2 through 5.
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
1
Removal and Replacement Procedures
2
2-13