Compaq ML350 - ProLiant - G2 Maintenance And Service Manual page 34

Removal and Replacement Procedures
6. Remove all hard drives and drive blanks. Refer to "Hot-Plug Hard Drive Blank" earlier in
this chapter.
7. With a Torx T-15 screwdriver, remove the four screws securing the drive cage to the
chassis (1).
8. Pull the drive cage away from the chassis (2).
Figure 2-16: Removing a hot-plug hard drive cage
To replace a hot-plug hard drive cage, reverse steps 2 through 8.
2-20
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
2
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide
1
1
1