Compaq ML350 - ProLiant - G2 Maintenance And Service Manual page 39

6. Press on the top of the expansion slot latch (1) and open the latch toward the rear of the
chassis (2).
7. Remove the expansion board (3).
8. Close the expansion slot latch.
9. If the expansion board is not immediately being replaced, replace the expansion board
retainer.
1
Figure 2-21: Removing the expansion board
To replace an expansion board, reverse steps 2 through 9.
Compaq ProLiant ML350 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Forge Part Number: 236634-002 Last Saved On: 5/14/02 12:00 PM
2
3
Removal and Replacement Procedures
2-25