Replacing The System-Board Shield - Dell Inspiron One 2020 Owner's Manual

3 Disconnect the antenna-in connector cable from the connector on the
TV-tuner card.
4 Remove the antenna-in connector. See "Removing the Antenna-In Connector" on
page 37.
1 system-board shield
3 TV-tuner card

Replacing the System-Board Shield

Procedure
1 Replace the antenna-in connector. See "Replacing the Antenna-In Connector" on
page 38.
2 Connect the antenna-in connector cable to the connector on the TV-tuner card.
3
Turn the system-board shield over and align the screw holes on the
system-board shield with the screw holes on the chassis.
4 Replace the screws that secure the system-board shield to the chassis.
Postrequisites
1 Replace the back cover. See "Replacing the Back Cover" on page 20.
2 Replace the stand. See "Replacing the Stand" on page 18.
3 Replace the stand cover. See "Replacing the Stand Cover" on page 16.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
36
| System-Board Shield
2 antenna-in connector cable
3
2
1