Replacing the Antenna Modules
Procedure
1
Adhere the antenna modules to the chassis.
2
Route the antenna cables through the routing guides.
3
Connect the antenna cables to the connectors on the wireless Mini-Card.
Postrequisites
1
Replace the system-board shield. See "Replacing the System-Board Shield" on
page 36.
2
Replace the back cover. See "Replacing the Back Cover" on page 20.
3
Replace the stand. See "Replacing the Stand" on page 18.
4
Replace the stand cover. See "Replacing the Stand Cover" on page 16.
5
Follow the instructions in "After Working Inside Your Computer" on page 13.
40
|
Antenna Modules