Power Supply Preparation - Nextar W3G - W3G LCD Color Touch Screen Portable GPS/MP3 Instruction Manual

Using the AC Adaptor
The player is supplied with an AC adaptor for powering the unit and charging the battery.
1. Connect AC adaptor to the
right side of the player in the
jack marked DC 5V IN, as
shown on the right.
2. Plug the two-prong end of the
power cord into a grounded
electrical outlet. The power
indicator lights red.
Note:
Turn unit's power off before unplugging.
In the case of using the adaptor, the LCD screen will be brighter than with the
rechargeable battery.
Using of Car Adaptor
The player is supplied with a Car Adaptor for powering the unit while in a vehicle.
Connect the Car Adaptor Power
Plug to the unit's power jack and
plug the other end to the vehicle's
5V accessory/ cigarette socket, as
shown on the right figure.
Attention
Place the unit in a proper position for viewing.
Disconnect the player from the Car Adaptor when starting the vehicle.
Your portable GPS player comes with a built-in rechargeable battery. Please see details
in the following segment.
Power Supply
Preparation
11