Turning On The Power; Picture Adjustments - Sharp LC 32SH20U - 32" LCD TV Operation Manual

Appendix
Problem
• No power
• Unit cannot be operated.
• Remote control unit does not
operate.
• Picture is cut off screen.
• Strange color, light color, or color
misalignment
• Power is suddenly turned off.
• No picture
Possible Solution
• Check if you pressed POWER on the remote control unit. (See page 14.) If the
indicator on the TV does not light up, press POWER on the TV.
• Is the AC cord disconnected? (See page 7.)
• Has the power been turned on? (See page 14.)
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning on the power of the TV
or unplugging the AC cord and replugging it in after 1 or 2 minutes.
• Are batteries inserted with polarity (% -) aligned? (See page 8.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
Are screen mode adjustments such as view mode choose made correctly? (See
page 28.)
• Adjust the picture tone. (See page 21 .)
Is the room too bright? The picture may look dark in a room that is too bright.
Is the sleep timer set? (See page 29.)
Check the power control settings. (See page 14.)
The unit's internal temperature has increased.
Remove any objects blocking vent or clean.
Is connection to other components correct? (See pages 24 to 25.)
• Is correct input signal source selected after connection? (See page 23.)
• Is the correct input selected? (See page 23.)
• Is picture adjustment correct? (See page 21.)
• No sound • Is the volume too tow? (See page 17.)
• Is "OFF" selected in "SPEAKERS"? (See page 29.)
The example of an error message Possible Solution
displayed on a screen
• DIGITAL CHANNEL SIGNAL • Check the antenna cable. Check that the antenna is correctly setup.
STRENGTH IS LOW
• DIGITAL CHANNEL IS • It is subscription channel. Contact the service provider.
SCRAMBLED
• AUDIO ONLY • The channel has audio contents only.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit wilt recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: -4°F to +140°F (-2O°C to +6O°C)
_= 39