Sharp LC 32SH20U - 32" LCD TV Operation Manual page 6

iMPORTANT SAFETY iNSTRUCTiONS
. Outdoor Antenna Grounding -- If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and buitt-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSl/NFPA 70
ANTENNA
LEAD IN WIRE
NEC -- NATIONAL ELECTRICAL CODE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
= POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
I To prevent fire, never place any type of candle or flames on the top or near the -IV set. /
J
I To prevent fire or shock hazard, do not expose this product to dripping or splashing. ©,_,_
No objects filled with liquids, such as vases, should be placed on the product. _ /
J
I o prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy _"_
items.
Turn off the main power and unplug the AC cord from the wall outlet before handling.
Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.
Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,
such materials may damage the panel surface.
J
. Do not display a still picture for a long time, as this could cause an afterimage to remain. )