Sharp LC 32SH20U - 32" LCD TV Operation Manual page 30

Useful adjustment settings
Allows you to select what controls the audio output.
Press MENU and the MENU screen
displays.
Press 4/t_ to select @> (AUDIO).
Press A/V to select "SPEAKERS".
Press 4/t_ to select "ON" or "OFF".
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 0
T
t_):SELECT I_:ADJUST
ON
OFF
Sound via speaker is adjusted with
VOL +/- on the remote control unit or
VOL -/+ on the TV.
Sound via the AUDIO OUTPUT
terminal is not adjustable and outputs
at a consistent level.
Sound via the AUDIO OUTPUT
terminal is adjusted with VOL +/- on
the remote control unit or VOL -/+ on
the TV.
Sound via speaker is muted.
Press EXIT to return to the normal screen.
Allows you to set a time when the TV automatically
switches to standby.
FREEZE SURROUND FLASHBACK
CD CD CD
SLEEP MENU
Each time you press SLEEP, the remaining
time setting switches as shown below.
SLEEP
OhOOm
(Sleeptimeroff)
SLEEP
OhlOm
step up by 10 minutes
SLEEP
lh50m
4!"
SLEEP
2hOOm
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
• If you want to adjust the sleep timer again, you
can press SLEEP repeatedly then change the
time setting.
Press SLEEP.
• The remaining time displays when the sleep
timer has been set.
SLEEP
0h07m
• Select "0h00m" by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
_= 29