Turning On The Power; Turning Off The Power - Sharp AQUOS LC-37HV4U Operation Manual

Watching TV
POWER indicator
MAIN STANDBY/ON indicator
POWER
Display status indicator
Off
Flashing red
Red
Green
AVC System status indicator
Off
Red
Green
Downloaded from: http://www.usersmanualguide.com/
Display
POWER button
MAIN POWER
AVC System
TV CBL VCR DVD
/SAT /LD
TV
/DTV
POWER ANT-A/B INPUT
AV FRONT
MODE SURROUND MTS CC
TWIN
PICTURE SELECT
VIEW SUB TWIN CH
MODE FREEZE INPUT
DISPLAY SLEEP LEARN
EDIT/
1 2 3
4 5 6
7 8 9
0
100
ENT
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System is on.
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System is on.

Turning on the power

1
Press MAIN POWER on the Display.
• The POWER indicator on the Display flashes red.
2
Press MAIN POWER on the AVC System.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the POWER
indicator on the Display still light up red, press TV POWER on
the remote control unit or MAIN POWER on the AVC System to
turn the System on.
First time turning on the AVC System
1
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System lights up red.
2
Press MAIN POWER on the Display.
• The System turns the power on.
• The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
• If the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display still light up red, press TV
POWER on the remote control unit or POWER button on the
Display to turn the System on.
NOTE
• The initial setup starts when the System powers on for the first time. If the
System has been turned on before, the EZ setup will not be invoked. See
page 27 to try EZ setup from the Setup menu.

Turning off the power

1
Press TV POWER on the remote control unit or
POWER button on the Display.
• The System enters standby mode and the image on the screen
disappears.
• Both the STANDBY/ON indicator on the AVC System and the
POWER indicator on the Display change from green to red.
2
Press MAIN POWER on the AVC System.
• The STANDBY/ON indicator on the AVC System turns off and
the POWER indicator on the Display flashes red.
3
Press MAIN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• When the STANDBY/ON indicator lights up red, it takes about 10 to 15
seconds for the indicator to turn off if MAIN POWER on the AVC System is
turned "Off" or the AC cord is unplugged from the AC outlet.
21