Appendix - Sharp LC 32SH20U - 32" LCD TV Operation Manual

Appendix
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
, Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
f
1
_ hex key
????
Soft cushion
i
Unfasten the four screws used to secure the stand in
place.
2
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.)
• To attach the stand, perform the above steps in reverse order.
, installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional bracket (AN-26AG1 bracket for
LC-26SH20U or AN-37AG2 bracket for LC-32SH20U) to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall About setting the TV angle
Wall mount bracket. (See the bracket instructions for details.)
LC-26SH20U Up to 20 °
LC=32SH20U Up to 10°
Vertical mounting
Angular mounting
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
_- 38