Installing The Thermal Sensor; Removing The Hard Drive - Dell Precision T5600 Owner's Manual

Installing the Thermal Sensor

NOTE: The thermal sensor is an optional component and your computer may not ship with it.
1. Connect the thermal sensor to the component that you wish to monitor the temperature, and secure it with the
latch.
2. Connect the thermal sensor cable to the system board.
3. Install the cover.
4. Follow the procedures in

Removing the Hard Drive

1. Follow the procedures in
2. Remove the cover.
3. Remove the hard-drive power supply cable and the hard-drive data cable from the hard drive.
4. Press in on the latches on either side of the hard drive bracket.
After Working Inside Your Computer .
Before Working Inside Your Computer .
13