Installing The Memory; Removing The Coin-Cell Battery; Installing The Coin-Cell Battery; Removing The Heat Sink - Dell Precision T5600 Owner's Manual

Figure 2.

Installing the Memory

1. Insert the memory module into the memory socket.
2. Press down on the memory module until the securing clips secure the memory in place.
3. Install the cover.
4. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the cover.
3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the coin-cell
battery out of the computer.
Figure 3.

Installing the Coin-Cell Battery

1. Place the coin-cell battery into the slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install the cover.
4. Follow the procedures in

Removing the Heat Sink

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Disconnect the heat sink cable from the system board.
16
After Working Inside Your Computer .
Before Working Inside Your Computer .
After Working Inside Your Computer .