Advertisement
Available languages
Available languages
INSTALLATION
REQUIREMENTS
Gather the recommended
tools and parts before starting
installation. Read and follow the instructions
3rovided with any
tools listed here.
All Installations
Tools needed:
%0" and I/4"
nut drivers
or
heX soCkets
Measuring
tape
or ruler
10" adjustable
wrenc
that
opens to
11/8,! ( 2,9 cm)
UL LiSted/CSA
_
APPrOVed twist-on
U
wire connectors*
*Must be the proper size to connect your household wiring to
16-gauge wiring in dishwasher.
Other useful items you may need:
Parts supplied:
Silver Green
Make sure all these parts are included in the literature package.
Parts needed:
%" compr ×¾, hose fitting
For part or kit, see local
retailer or call Whirlp0ol
Parts! 1,800-442-9991, Part
Number W10273460
Other parts you may also need:
1'/2"
"
Sidem0unting
kit
--2
(38:!_ 5 cm)
for solid surface
Idu_
_ Screw:type
I
c0untertops
I
[clamPs(3
maximum)J
(Part Number
I
8212560)
J
NOTE: Parts available for purchase in plumbing supply stores.
Check local codes. Check existing electrical supply. See
"Electrical Requirements" section. It is recommended
that
electrical connections be made by a licensed electrical installer.
In addition, for first-time
installations
Tools needed:
with 1/2i[ 3/4_
Y/_
]
_
and
11/2
hole
_/_
] Sma
sawbks
_
] tubing cutter wire
stripper
Parts needed:
CopPer tubing
(3/_'!
See "Electrical Requirements,,
secti0nl
O.D Suggested)or
flexibebadedl r i
For Direct Wire'. , For Power Supply
water suna v
ne
use UL Dsted/
Cord: use UL
CSA Approved
Listed/CSA
I strain
App[oved
power
tttt,tt.
Ito
fit % (2,2 €m)
supply cord kit
hole
marked for use with
dishwasher
Grounded electrical supply required.
Do not run drain lines, water lines or electrical wiring where they
can interfere with or contact dishwasher motor or legs.
The location where the dishwasher will be installed must provide
clearance between motor and flooring. Motor should not touch
the floor.
Do not install dishwasher over carpeted flooring.
Shelter dishwasher and water lines leading to dishwasher against
freezing. Damage from freezing is not covered by the warranty.
A side panel kit is available from your dealer for installing your
dishwasher at the end of your cabinetry.
A moisture barrier accessory (Part Number 4396277) is available
from your dealer for installing underneath the countertop.
Check location where dishwasher will be installed. The location
must provide:
•
easy access to water, electricity and drain.
convenient access for loading and unloading dishes.
Corner locations require a 2" (5.1 cm) minimum clearance
between the side of the dishwasher door and the wall or
cabinet.
•
square opening for proper operation and appearance.
•
cabinet front perpendicular
to floor.
•
level floor. (If floor at front of opening is not level with floor
at rear of opening, shims may be needed to level
dishwasher.)
Helpful Tip: Be sure to accurately measure dimensions and
ensure dishwasher is level if the floor in the dishwasher opening is
uneven (example: Flooring extends only partway into opening).
NOTE: To avoid shifting during dishwasher operation, shims must
be securely attached to the floor.
If dishwasher will be left unused for a period of time or in a
location where it may be subject to freezing, have it winterized by
authorized service personnel.
Make sure pipes, wires and drain hose are within the shaded area
shown in the "Product and Cabinet Opening Dimensions" section.
Advertisement
