Download Print this page

Move Dishwasher Close To Cabinet Opening - Whirlpool DU1014XTXD Installation Instructions Manual

Undercounter dishwasher
Hide thumbs Also See for DU1014XTXD:

Advertisement

Available languages

Available languages

Using a pair of pliers, bend the tab down to secure the bracket in
place. Repeat this step for the other side.
NOTE: Do not attach the dishwasher. This will be done later.
Option 2, Side Attachment
For marble, granite, or other hard surface countertops
Order Mounting Bracket Kit Part Number 8212560.
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1JStand
dishwasher
upright
i
I
i
I
i
Using 2 or more people, stand dishwasher upright.
NOTE: Do not install kick plate until instructed to do so.
IMPORTANT: Double-check
correct placement of utilities. Grasp
the sides of the dishwasher at the edges of the door panel. Tilt
dishwasher backward on wheels and move dishwasher close to
cabinet opening.
NOTE: Do not push on the front of the panel or on the console.
Panel or console may dent.
Helpful Tip: Temporarily tape utilities to the floor in the locations
shown to prohibit them from moving when dishwasher is moved
into the cabinet opening.
Check that water line is on the left side of opening and drain hose
is near the center of the cabinet opening.
Open and close door
With another person holding the dishwasher to keep it from
tipping, open and close the door a few times. If the door closes or
falls open under its own weight, the door tension will need to be
adjusted.
14

Advertisement

loading