Advertisement
Available languages
Available languages
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal
box.
Do not use an extension cord.
Failure to follow
these instructions can result
in death,
fire, or electrical shock.
2_
Power Supply
Cord=
Connect
ground
wire
....
l
o
he)
Remove the green grounding
screw and place through the ring
terminal of the green ground wire. Reattach
and tighten the green
screw.
NOTE: Do not pre-twist stranded wire. Twist on wire connector.
Gently tug on wires to be sure both are secured.
Connect wires black to black and white to white, using UL
Listed/CSA Approved twist-on wire connectors.
If needed, see website for animated representation
of this step.
Visit www.whirlpool.com
under FAQ tab.
41
Power Cord-Secure
cor
--"
on strain
relief
0
Tighten strain relief screws to secure cord.
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 1/4"nut driver and previously removed
screw to secure cover.
NOTE: Do not plug into outlet until instructed to do so.
12
Advertisement
