Advertisement
Available languages
Available languages
Connect wires black to black and white to white, using UL
Listed/CSA Approved twist-on wire connectors (not included).
If needed, see website for animated representation
of this step.
Visit www.whirlpool.com/electrical
under FAQ tab.
Tighten strain relief screws to secure cable.
Place wires inside terminal box. Insert tabs on left side of cover.
Make sure wires are tucked inside box. Close cover ensuring
wires are not pinched. Use 1/4"nut driver and previously removed
screw to secure cover.
Check that dishwasher
is still level front-to-back
and side-to-side
in
cabinet
opening.
IMPORTANT:
If you have solid countertops
such as Corian%
granite,
etc., you must use side mounting
kit (Part Number
8212560).
Follow
kit instructions.
(Brackets
included
with kit.)
Open dishwasher
door, remove lower dish rack, and place towel over
pump assembly
and lower spray arm of dishwasher.
This will keep
screws from falling into pump area when you are securing
dishwasher
to countertop.
NOTE: Do not drop screws into bottom
of dishwasher.
Locate brackets
on top of dishwasher
and secure dishwasher
to
countertop
with two, #10 x 1/2" Phillips-head
screws (included).
The
dishwasher
must be secured to keep it from shifting
when door is
opened.
1-®Corian is a registered trademark
of E.I. Du Pont De Nemours and Company.
18
Advertisement
