Seek Mode; Frequency Step Setting (Australia Only) - Kenwood KVT-696 Instruction Manual

1
"AUT02"
"MANU"
The mode is switched in following order each
time you touch the button.
Seek Mode
Sets a station selection.
Display
"AUTO1"
[]]] Memorized stations are displayed. Touch to
tune in.
~ Scrolls the list.
[gJJ
(FM band only) Switches the list display
name to Station name or Program Service
Name.*'
• *1
North American sales area only
~
~
Frequency Step Setting
(Australia only)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1
o
Switch the frequency step
While pressing
c::f
[VOLUME] button and
EJ
[SRC] button, press the Reset button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10kHz.
English
fa
29