Epson Endeavor Vga Utilities Manual page 48

3. Type the following and press
AVGA2D.EXE
This command loads a protected-mode TSR driver for
VersaCAD 2D. When the program is loaded, you see this
message:
4. Make a copy of the original VersaCAD 2D configuration file,
ENVIRO.CFG, and name the copy ENVIRO.OLD.
Use a text editor or word processing program that can save a
5.
file in ASCII format to edit the
following statements at the end of the screen parameters
section:
6. Type ENVIRO. EXE and press
configuration menu.
Select [S] Screen Configuration.
7.
8. Press the space bar or
Cirrus Logic GD540x, GD542x, 800x600
44 VGA Utilities
. file. Add the
CFG
ENVIRO
. You'll see a
until you see the following: