Epson Endeavor Vga Utilities Manual page 23

When you see the main menu, select Configuration and
5.
press
From the change config uration menu, select Primary
6.
Hardware and press
Then select Screen Driver and press
7.
Select I want to enter my own driver filename
8.
and press
Type the filename of the driver you want to use and press
9.
(The table above lists the driver filenames. Make
sure you include the. SC extension.)
10. Type to return to the main menu.
M
11. At the mainmenu, select Save All New Settings and
press
12. You see a prompt instructing you to insert your Setup
diskette in drive A. Instead, insert the diskette containing
the drivers on the root directory.
13. Press the space bar. The Setup program saves the current
configuration.
14. Select option ( 2 ) to copy the files to your hard disk, then
press any key.
VGA Utilities 19