Pcad - Epson Endeavor Vga Utilities Manual

PCad

Drivers for PCad are available in the resolutions shown in the
table below.
PCad driver files
Filename
D800.DRV
D1024.DRV
If you have not yet installed PCad, follow the instructions in
your PCad documentation to install it with the IBM VGA
640 x 400, E-color resolution. Then follow these steps to install
the new drivers:
1. Run the INSTALL program, described on page 6, to copy
the driver files to the PCad program directory on your hard
disk.
2. Log onto your PCad program directory.
3. Type the following and press
of your PCADDRV.SYS file before you modify it:
COPY PCADDRV.SYS PCADDRV.OLD
4.
Use a text editor or word processing program that can save a
file in ASCII format to edit the PCADDRV.SYS file. Change
the driver filename listed in the DISPLAY command line to
the name of the driver file you want to use. (See the table
above for the filenames.)
For example, if you want to install the 800 x 600 driver and
you used the default pathnames when you installed PCad,
change the command line to look like this:
DISPLAY C:\PCAD\DRV\DBOO.DRV
Resolution
800 x 600. 16 colors
1024 x 768, 16 colors
to make a backup copy
VGA Utilities 39