Lotus L-2-3 Or Symphony, Version 2.X - Epson Endeavor Vga Utilities Manual

Lotus I-2-3 or Symphony, Version 2.x
The drivers for version 2.x of Lotus l-2-3 support the text
modes and graphics resolutions listed in the table below.
Lotus 1-2-3 or Symphony, version 2.x driver files
Filename
TC132X25.DRV
TC132X43.DRV
AVGAGR.DRV
If you have not yet installed Lotus l-2-3 or Symphony, follow
the instructions in your Lotus documentation to install it. Then
follow these steps to install the drivers:
Run the INSTALL program, described on page 6, to copy
1.
the Lotus drivers to the Lotus program directory on your
hard disk.
Log onto your Lotus program directory.
2.
Type
3.
INSTALL
program.
From the main menu, select Advanced options and press
4.
Thenselect Add new drivers to library and press
5.
When the program finishes adding drivers to the library,
6.
select Modify current driver set and press
Select Text display to modify the text mode or
7.
Graphics display to modify the graphics resolution
and press
28 VGA Utilities
Resolution
132 x 25, 16-color text
132 x 43, 16-color text
800 x 600, 16color graphics
and press to run the Lotus installation