Installing The Drivers; Configuring Your Autodesk Vga Environment - Epson Endeavor Vga Utilities Manual

Installing the Drivers

If you have not already installed your AutoDesk product,
follow the instructions in your AutoDesk documentation to
install it. Select a standard VGA driver and make sure the
application is functioning properly before you install these
drivers.
Note
The AutoDesk drivers share memory with AutoCAD. If you
notice significant hard disk activity while you are using the
AutoDesk drivers, you probably need to install additional
RAM.
To install the drivers, run the INSTALL program, described on
page 6, to copy the AutoDesk drivers to your hard disk.
Select the drivers that correspond to the AutoDesk products
you are using.

Configuring Your AutoDesk VGA Environment

Follow these steps to configure your AutoDesk environment
using the DLDSETUP program:
1. Log on to the directory where you've stored your AutoDesk
drivers.
Type
2.
DLDSETUP
welcome screen for DLDSETUP.
Press any key, then follow the instructions on the screen to
3.
select the options you want to use.
When you respond to the final prompt, the program creates
the file FASTACAD.BAT in your current directory.
10 VGA Utilities
and press The program displays a