Nic Indicators; Side Views; Nic Indicator Led States; Figure 8. Dual-Stacked Rj45 Connectors With Nic Indicators - Dell External OEMR R410 Technical Manual

Dell
Amber — Indicates a problem with the power supply.
Alternating green and amber — When hot-adding a power supply, this indicates that the power supply
is mismatched with the other power supply (for example, a High-Output 500W power supply and a
400W power supply are installed in the same system). Capacity of the installed power supplies must
match.

3.6 NIC Indicators

Figure 8 shows the RJ45 connectors.
Figure 8.
Table 4 details the NIC indicator LED states.
D0uninitalized (out of
box), D3cold, S4
(hibernation)
Pre-OS POST or OS
without driver
OS with driver

3.7 Side Views

Side views are shown in Figure 9 and Figure 10.
PowerEdge R410 Technical Guide
Dual-Stacked RJ45 Connectors with NIC Indicators

NIC Indicator LED States

Table 4.
State
No link
WOL disabled
WOL enabled, link, no
activity
WOL enabled, link,
activity
Link, no activity
Link, activity
Link, no activity
Link, activity
Link LED
(Green/Yellow)
Off
Off
Green if the port is
operating at maximum
port speed; Yellow
otherwise
Green if the port is
operating at maximum
port speed; Yellow
otherwise
Activity LED (Green)
Off
Off
Off
On (blinking at speed
related to packet
density)
Off
On (blinking at speed
related to packet
density)
Off
On (blinking at speed
related to packet
density)
17