Printer Specifications - Sharp MX-3111U Operation Manual

PRINTER SPECIFICATIONS

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 Printer expansion kit is required.
*2 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*3 Barcode font kit is required.
*4 When the XPS expansion kit is installed.
*5 Required when there is insufficient memory to handle certain print data. Must be used when the XPS expansion kit
is installed.
Built-in
MX-2010U: 20 pages/min
MX-2310U: 23 pages/min
MX-3111U: 31 pages/min
(When printing same document continuously on 8-1/2"x11" (A4) plain paper in non-offset mode,
excluding processing time.)
600x600 dpi, 9600 equivalent x 600dpi
Sharp Advanced Printing Language-c, PCL6*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
1
PCL6*
2
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Standard system memory: 1GB
5
Expansion memory: 1GB*
Entire page excluding margin of 11/64" (4.2mm) at each edge. The actual print area may vary
depending on the printer driver and the software application.
3-80
1
, PostScript 3 compatible*
2
80 European fonts, 28 barcode fonts*
136 European fonts
PRINTER
2 4
, XPS*
3
, 1 bitmap font
Contents