Sharp MX-3111U Operation Manual page 192

Special Modes
Card Shot
X
Y
4
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Use the same [START] key that you used for the front side of the card.
6
To cancel scanning...
Press the [STOP] key (
Place next original. Press [Start].
When finished, press [Read-End].
7
To cancel copying...
Press the [STOP] key (
(1) (2)
OK
Cancel OK
3
3
(1~8 1/2)
8
Fit to
(A)
inch
Page
2 1
(1~8 1/2)
8
inch
(B)
Size Reset
).
).
Read-End
).
Select card shot settings.
(1) Enter the original size.
With the [X] key highlighted, enter the X (horizontal)
dimension of the original with the
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
(A) To enlarge or reduce the images to fit the paper
based on the entered original size, touch the [Fit to
Page] key.
(B) The [Size Reset] key can be pressed to return the
horizontal and vertical dimensions to the values set in
"Card Shot Settings" in the system settings
(administrator).
(2) Touch the [OK] key.
You will return to the base screen of copy mode. Make
sure that the entered dimensions appear in the [Original]
key.
Touch the [Read-End] key.
Copying will begin.
2-82
COPIER
keys.
keys.
Contents