Depth Range - Manual; Fastrack - Eagle FishStrike 2000 Installation And Operation Instructions Manual

2. The Depth Range Control Scale appears. Press
different depth range. A blue bar highlights the selected range. The
shaded numbers can not be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. Turn off automatic depth range. From the Sonar Page, press
to
A D R
UTO EPTH
2. Press ↑ to
D
EPTH
3. Press ↓ or ↑ to select a different depth range. A blue bar highlights
the selected range.
4. When the new range is selected, press
NOTE:
The sonar's depth capability depends on the transducer
installation, water and bottom conditions among other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. FasTrack gives you a rapid update of
conditions directly under the boat. This makes it useful for ice fishing,
or fishing at anchor. When the boat is not moving, fish signals are long,
drawn out lines on a normal chart display. FasTrack converts the graph
to a vertical bar graph that, with practice, is useful when fishing at a
stationary location.
Surface clutter
Structure
Colorline
Bottom signal
| .
ENT
ANGE
|
R ENT
ANGE
Sonar Page showing FasTrack.
EXIT
and the Depth Range Control Scale appears.
EXIT
61
↑ ↓
or
to clear the menu.
to clear the menu.
Fish arches
to select a
↓
|
MENU

FasTrack,

fish arches
show as
horizontal
bars.
FasTrack
bar graph