Sonar Chart Mode - Eagle FishStrike 2000 Installation And Operation Instructions Manual

Sonar Menu with Sensitivity command selected (left).
To adjust sensitivity in manual mode:
1. First, turn off Auto Sensitivity; from the Sonar Page, press
to
A S
UTO ENSITIVITY
2. Press ↑ to
Press ↓ or ↑ to pick a different sensitivity setting. When it's set at the
desired level, press
NOTE:
To return to the original factory setting for Auto Sensitivity, see the
entry in this section on Reset Options. If sensitivity is in manual
mode, the Reset Options command will switch back to Auto and
reset the factory setting.
Tip:
For quicker sensitivity adjustments, try leaving the Sensitivity
Control Bar on the screen as the chart scrolls. You can see the
changes on the screen as you press the up and down arrows. This is
handy when there's a lot of clutter in the water and you are
matching the sensitivity to rapidly changing water conditions.

Sonar Chart Mode

The default color scheme for the sonar chart is White Background, but
we offer other variations to suit your viewing preferences. The chart
can be displayed in Grayscale, Reverse Grayscale, Blue Background
Nightview, Iceview or Bottom Color Tracking.
To change the chart mode:
1. From the Sonar Page, press
→ ↓ to
2.
Press
3. Press ↓ or ↑ to
4. Press |
EXIT
The Sensitivity Control Bar (right).
| .
ENT
|
S ENT
ENSITIVITY
.
EXIT
S C M
ONAR HART
Mode Name
to return to the Sonar Page.
EXIT
and the Sensitivity Control Bar appears.
|↓ to
MENU
| .
ENT
ODE
| .
ENT
75
S F
ONAR EATURES
|↓
MENU
| .
ENT