Depth Range - Manual; Fastrack - Eagle FISHSTRIKE 1000C Installation And Operation Instructions Manual

2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a
different depth range. A blue bar highlights the selected range. The
lighter range numbers can not be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the
manual mode. There are 16 depth ranges, from 5 to 4,000 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
↓
| to
MENU A
UTO
2. Press ↑ to
D
3. Press ↓ or ↑ to select a different depth range. A horizontal blue bar
highlights the selected range.
4. When the new range is selected, press
NOTE:
The sonar's
installation, water and bottom conditions, and other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen
continues to operate normally. FasTrack gives you a rapid update of
conditions directly under the boat. This makes it useful for ice fishing,
or when you're fishing at anchor. When the boat is not moving, fish
signals are long, drawn out lines on a normal chart display. FasTrack
converts the graph to a vertical bar graph that, with practice, makes a
useful addition to fishing at a stationary location.
Surface clutter
Structure
Colorline
Bottom signal
D R
EPTH ANGE
|
R ENT
EPTH ANGE
depth

Sonar Page showing FasTrack.
EXIT
| .
ENT
and the Depth Range Control Scale appears.
EXIT
capability depends
63
to clear the menu.
to clear the menu.
on the
Fish arches
transducer

FasTrack,

fish arches
show as
horizontal
bars.
FasTrack
bar graph