Depth Range - Manual; Fastrack - Eagle Cuda 240 S/GPS Installation And Operation Instructions Manual

2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A dark bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press

Depth Range - Manual

You have complete control over the range when the unit is in the man-
ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
To switch to Manual Depth Range:
1. First, turn off automatic depth range. From the Sonar Page, press
|↓ to
MENU A
UTO
2. Press ↑ to
D
3. Press ↓ or ↑ to select a different depth range. A horizontal dark bar
highlights the selected range.
4. When the new range is selected, press
To turn Auto Depth Range on again:
1. From the Sonar Page, press
NOTE:
The sonar's depth capability depends on the transducer installa-
tion, water and bottom conditions, and other factors.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen con-
tinues to operate normally. FasTrack gives you a rapid update of condi-
tions directly under the boat. This makes it useful for ice fishing, or
when you're fishing at anchor.
Fish arches
Structure
Bottom signal

Grayline
D R
EPTH ANGE
|
R ENT
EPTH ANGE
Sonar Page showing FasTrack.
EXIT
| .
ENT
and the Depth Range Control Scale appears.
EXIT
|↓ to
MENU
49
to clear the menu.
to clear the menu.
A D R
UTO EPTH ANGE
Surface clutter
In FasTrack, fish
arches show as
horizontal bars.
| | .
ENT EXIT

FasTrack

bar graph