Power/Lights On And Off - Eagle FishStrike 2000 Installation And Operation Instructions Manual

Fish-finding sonars & mapping gps

Table of Contents

2. PAGES – Pressing this and the ← → arrow keys switches the unit

between the four different page screens. (Satellite Status Page,

Navigation Page, Map Page and Sonar Page.) Each page represents one

of the unit's major operation modes.

3. MENU – Press this key to show the menus and submenus, which

allow you to select a command or adjust a feature. This also accesses

search functions for streets, intersections, addresses and highway exits.

4. ARROW KEYS – These keys are used to navigate through menus,

make menu selections, move the map cursor and sonar chart cursor and

enter data.

5. ENT/ICONS (Enter & Icons) – This key allows you to save data,

accept values or execute menu commands. It is also used to create

event marker icons.

6. EXIT – The Exit key lets you return to the previous screen, clear

data or close a menu.

7. WPT – (Waypoint) The Waypoint key is used to save, search and

recall waypoints. It not only gives you access to the waypoints list, but

also launches the Point-of-Interest (POI) search menus and is involved

in some navigation functions.

8. ZOUT – (Zoom Out) – This key lets you zoom out the map display.

On the Sonar Page, the

display, showing the entire water column from surface to bottom. On

the Map Page, it lets you see a larger geographic area on the map. Less

detail is seen as you zoom out.

9. ZIN – (Zoom In) – This key lets you zoom in on the map. On the

Sonar Page, it enlarges fish signals and bottom detail. On the Map

Page, zooming in lets you see greater detail in a smaller geographic

area on the map.