Reset Options; Require Dgps (Seacharter 480Df Only) - Eagle FishElite 480 Installation And Operation Instructions Manual

The command remains available in the unit's software, but we recom-
mend that you leave it in the default off (unchecked) mode. The "wan-
dering" plot trail issue has now been corrected by the Track Smoothing
feature. Turning on Position Pinning could actually result in an inaccu-
rate plot trail if you are moving around in a relatively small area. If you
want to experiment with Position Pinning, the same instructions are
used to turn the feature on (checked) and off (unchecked.)
1. Press
MENU
2. Press |
EXIT

Reset Options

To reset all features to their factory defaults:
1. Press
MENU
to | .
Y ENT
ES
NOTE:
Reset Options does not erase any waypoints, routes, icons, plot trails or
sonar logs.
Require DGPS
(SeaCharter 480DF only)
You can force the SeaCharter 480DF to require DGPS for reporting a
valid position. (The default setting, off, uses DGPS automatically when
an optional DGPS beacon receiver is connected. However, this auto
mode doesn't require DGPS reception to yield a position.) Here's how to
turn mandatory DGPS on and off.
1. Press
MENU
2. To return to the last page displayed, press
3. You can return to this command and press
ture off.
| |↓ to
MENU GPS S
to return to the previous page.
EXIT
| |↓ to
MENU S
Reset Options command, left,
and the Reset Options Menu, right.
| |↓ to
MENU GPS S
|
ENT
ETUP
|
S ENT
YSTEM ETUP
|
ENT
ETUP
158
|↓ to
P
OSITION
|↓ to
R
ESET
|↓ to
R DGPS
EQUIRE
| .
EXIT EXIT
again to turn the fea-
ENT
| .
P ENT
INNING
| |←
O ENT
PTIONS
| .
ENT