Reset Options - Eagle 500C Installation And Operation Instructions Manual

To change Ping Speed:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press ↑ to increase ping speed;
press ↓ to decrease speed. When it's set at the desired level, press
To turn off HyperScroll:
1. From the Sonar Page, press
2. The Ping Speed Control Bar appears. Press↓ to decrease ping speed
to 50 percent. When it's set at the desired level, press
When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see its entry in this section.

Reset Options

This command is used to reset all features, options and settings to their
original factory defaults. This is useful when you have changed several
settings and want to return the unit to basic automatic operation.
1. Press
MENU
2. Press ← to
3. All the menus are cleared and the unit reverts to the Map Page at
the 4000 mile zoom range, just as if you had turned it on for the first
time. All options have been returned to the factory settings.
At left, System Setup menu with Reset Options command selected. At
right, the Reset Options dialog box, with "Yes" selected.
| |↓ to
MENU S
| .
Y ENT
ES
|↓ to
MENU
|↓ to
MENU
|
S ENT
YSTEM ETUP
73
|
P S ENT
ING PEED
|
P S ENT
ING PEED
EXIT
|↓ to
R
ESET
.
.
EXIT
.
.
| .
O ENT
PTIONS